PHOTOS OF AN INSTALLATION

PHOTO 1    Adjusting the rock drilling template to the pole butt.

PHOTO 2    Drilling the rock hole thru the drilling template.

PHOTO 3    The anchor modules are placed in the drilled holes.

PHOTO 4     The pole is lowered thru the pole bands of the loose anchor modules.

PHOTO 5    The studs are inserted to join the pole bands into a tight collar around                      the pole.

PHOTO 6   The studs are tightened.

PHOTO 7   The nuts of the anchor bolts are tightened expanding the expansion                     shells at the bottom of the holes.

PHOTO 8   The pole is securely anchored to the rock.